Block RFID Tags with Faraday Bags

RFID radio frequency identification tag reader system warehouse inventory asset tracking RF tag keyfob chip radio frequency communication

RFID Tracking Systems

How to Prevent Tags from Transmitting & Receiving Signals

Many businesses use some form of contactless radio frequency identification (RFID) tag system, whether it be for supply chain management, inventory and asset tracking, building access cards, etc. An RFID tag includes an antenna for transmitting and receiving signals, and an RFID chip which stores the tag’s ID and other information. The tag can be easily applied to the surface of an item and read using radio frequency (RF) technology. These radio waves transmit data from the tag to a reader, which then transmits the information to an RFID computer program. This system enables instant visibility into the whereabouts of an item, such as its particular location in a warehouse, office, hospital, shipping container, and so forth.

RFID tag scan asset tagging zebra handheld scanner TSL Alien ATID Honeywell box label bluetooth RFID chip scanners reader

Common Items That Are RFID Tagged:

    • Inventory
    • Assets
    • Materials
    • Equipment
    • Medical supplies and pharmaceuticals
    • Building access cards
    • Vehicle keyfobs

Common Types of RFID Scanners & Readers Used:

    • Zebra Handheld RFID Scanners & Readers
    • TSL RFID Readers
    • Alien Handheld RFID Readers
    • TURCK (U Grok It) UHF RFID Reader for Smartphones
    • ATID AB700 UHF RFID Handheld Reader
    • Honeywell Readers

Increased use of RFID tags streamlines item tracking processes, but at same time also creates frustrations over the inability to block the signal emitting from RFID tags when a problem arises. For various reasons raging from security concerns to signal collision, you may not want the tag to be read by your scanner. For instance, tags placed too close to each other can cause interference and the user cannot easily separate the tags, which are affixed to boxes/items.

In order to eliminate RFID interference (unwanted communication between the tag and the reader), the radio frequency signal needs to be blocked/isolated. This can be done by placing the tagged item(s) inside of a faraday enclosure.

Block the Signal to Eliminate Interference

You can prevent RFID tag interference/communication by using a faraday enclosure to shield the signal emitting from the tag. Faraday enclosures use a unique material and tight seal in order to block RF signals from both being sent and received by an electronic device, such as an RFID tag. Although do-it-yourself faraday supplies can be used to build your own faraday enclosure, the construction is often tedious, expensive, and difficult to make reusable. If your business struggles with RFID interference or related issues, the easiest solution is to incorporate reusable faraday bags into the RFID tracking process. Once the tagged item is sealed inside the faraday bag, the RFID signal cannot be be picked up by the reader/scanner. When you want the tag to communicate with the reader, you can remove the item from the faraday bag. We offer a variety of faraday bags to meet a wide range of usage scenarios and size requirements. The products shown below are the top choices for isolating items with RFID tags, primarily due to their large volume and durable construction.

Recommended Products

Sold out

Sold out

All Mission Darkness faraday bags include at least two layers of high-shielding TitanRF Faraday Fabric on all interior sides with dual paired seam construction to block not only RFID signals, but also Wi-Fi, Bluetooth, cell, GPS, NFC, and radio signals with 60dB-80dB average attenuation.