Watch the Field to Lab demo video to see why the Blocker Locker 7 is an integral part of the digital evidence handling process.

• Digital evidence (cell phones and tablets specifically) should be RF shielded and remain charging from the point of seizure all the way to the lab, for maximum data recovery and password cracking with tools like Cellebrite and GrayKey. Simple Velcro faraday bags no longer support this entire process. This video shows the specific set of products that are required to ensure devices are not remote wiped and do not die while en route to the lab. It is important to understand that traditional digital evidence handling techniques are insufficient for current data extraction and password recovery tools. Read the blog post for more details.

Each cabinet includes a fully equipped setup for charging devices through the Window Charge & Shield Faraday Bag's dual sided USB filter; purchase additional Charge & Shield Faraday Bags to increase capacity to a maximum of 14 devices (2 per compartment)

The system ensures that officers follow the correct evidence processing steps to keep devices charged and shielded

• Secure cabinet with seven locker compartments designed specifically for forensic investigators to keep devices individually locked, shielded, and charged during storage
• Primarily used as an evidence locker for cell phones and tablets
• System ensures that device intake and storage is correct so that the passcode unlocking and data extraction process can be completed properly with the best results
• Each cabinet has a power outlet with two USB power receptacles and a unique outer lock
• Locking system consists of two keys for each locker compartment, four master keys that access all locker compartments, and a key dropbox with two keys
• Power indicator light on main cabinet
• Power failure detector sends SMS and/or email if power in the unit is lost
• Basic usage instructions magnetic sticker adhered to the locker (additional in-depth instruction sheet included)
• Includes seven Mission Darkness Window Charge & Shield Faraday Bags for Phones plus all necessary charging components and cable tips (one bag stationed in each locker compartment)
• Window Charge & Shield Faraday Bags are uniquely designed for charging devices in the Blocker Locker 7, then being transferred to a faraday forensic box
• The system allows devices to remain live and uncorrupted after seizure, until they can be interrogated or have data extracted at a later time
• Window Charge & Shield Faraday Bags block WiFi (2.4 & 5GHz), Bluetooth, cell signals including 5G networks, GPS, RFID, and radio signals
• Mission Darkness Blocker Locker 7 SKU: MDBL-7
• Designed and assembled in the USA
• Available to rent, contact us for a quote
• Compatible with the Blocker Locker 7 Stand add-on accessory; stack for increased storage and support
• Additional add-on options are listed below
• Simple installation - watch the installation video for further details

The complete Blocker Locker 7 - Charge & Shield Evidence Cabinet system is primarily used with digital forensics evidence items such as cell phones, tablets, GPS trackers, and similar electronics. The dual sided USB filter in each Charge & Shield Faraday Bag allows the user to easily switch from power to extraction tool when needed.

The Blocker Locker 7 comes with seven Window Charge & Shield Faraday Bags for Phones plus all necessary charging components. The bag can be transferred from the locker to the lab without compromising RF shielding. Up to two Charge & Shield Faraday Bags can fit in each locker compartment. Purchase additional Charge & Shield Faraday Bags to support more than seven devices in the cabinet. Available in phone or tablet size, window or non-window style (*window style bags are preferred for use with the Blocker Locker). Additional add-on options are listed below. Let us know your requirements so that we can quote you accordingly.

• Charge & Shield Faraday Bag with transparent window, dual sided USB filter with external cable lock, NeoLok magnetic closure, serial number, card pocket, and zipper compartment on back to hold cables
• Two Cable Sets (each set includes a universal angle USB A/M to A/M, lightning to USB, micro USB, USB-C, and USB extension)
• Optional short term charging add-ons such as a dual USB port car charger adapter, dual USB port wall charger, and continuously charging power banks (details listed below)

• Single locker compartment interior dimensions: 13" L x 18" W x 4.5" H (33cm x 45.7cm x 11.4cm)
• Cabinet exterior dimensions: 15" L x 18" W x 34" H (38.1cm x 45.7cm x 86.4cm)
• Cabinet weight: 85lbs (38.6kg)
• Shipping weight: 105lbs (47.6kg) – ships on a pallet

Keep digital forensics evidence on cell phones and tablets locked, charged, and shielded from RF signals

Introduce new devices by placing them inside the Charge & Shield Faraday Bag stationed inside each locker compartment

Once a cell phone, tablet, or similar device is received at the police station, the officer places it inside a vacant Mission Darkness Window Charge & Shield Faraday Bag, which is stationed inside each Blocker Locker compartment. The corresponding cable tip (provided in the bag's zipper pocket) is used to connect the device to the bag's inner USB port. The bag is then sealed using the NeoLok magnetic closure.

The officer connects the shielded USB A/M to A/M cable that is plugged into the locker compartment power outlet to the outer USB port on the Window Charge & Shield Faraday Bag. An external cable lock ensures that the cable isn't disconnected unintentionally. Device status can be confirmed by viewing the screen through the bag's transparent window.

The officer locks the compartment, then puts the key in the dropbox, and leaves evidence notes relating to the locker contents. The device can remain in the compartment securely locked, charged, and shielded indefinitely.

At the point when passcode breaking or data extraction is to occur, the individual handling the evidence uses a key (either the master or the corresponding one) to open the locker compartment. The user unlatches the external cable lock, disconnects the USB cable connected to the outer USB hub on the bag, and removes the sealed bag from the compartment.

The device remains shielded in the Window Charge & Shield Faraday Bag while it is transferred to the lab or location where it will be analyzed.

*Further steps vary depending on the usage scenario (see below).

Back side of the bag showing the assortment of charging cables included

Front side of the bag showing how the device connects to the USB extension cable plus compatible cable tip

Once passcode unlocking software is installed on the device and RF shielding is no longer required, the device can be transferred to the Forensic Crack Cabinet, as shown in the video

• If a device arrives to the police station already in a standard faraday bag, it can be transferred to a Window Charge & Shield Faraday Bag using a forensic box with hands-on access.
• Simply place both bags inside the forensic box, close the lid, and transfer the device using the conductive gloves. Faraday bags with a NeoLok magnetic closure are preferred when being handled by conductive gloves.
• *When in use, never open a faraday bag unless the environment is RF shielded (such as a faraday box or tent).

• The Window Charge & Shield Faraday Bag can be purchased and used independently without the Blocker Locker. The USB filter enables the device to receive power while it is transferred throughout various locations such as a vehicle, desk, or evidence cabinet, until it can be analyzed in a different RF shielded location.
• Use the shielded USB A/M to A/M cable attached to the outer side of USB filter to connect a portable battery or power outlet to charge the device inside.
• For data extraction through the USB filter, the user simply disconnects the power source and connects to an extraction tool.

• Charge & Shield Faraday Bags come in phone and tablet size, window and non-window style. Click the links below to view the product pages.
• Each Blocker Locker compartment can fit up to two Charge & Shield Faraday Bags, enabling you to increase the capacity from seven to fourteen devices.
• Each Charge & Shield Faraday Bag includes two comprehensive charging cable sets (USB A/M to A/M, lightning, micro USB, USB-C, and USB extension).  
• Additional add-on accessories can be added to each Charge & Shield Faraday Bag; options include dual USB port car and wall chargers, continuously charging portable power banks, and an additional cable set. These accessories enable short term charging capabilities, which may be required during transportation or until the bag can be connected to a long term power source (such as the Blocker Locker) while waiting to be analyzed in the lab. Ensuring that the device stays live throughout device intake prevents lockout mode and reduces the amount of time needed to break a passcode.

Additional Charge & Shield Faraday Bags

Additional USB Cable Set

12,800mAh Vigilant Volt Forensic Data Preserving Power Bank

19,200mAh Vigilant Volt Forensic Data Preserving Power Bank

Extended One Year Warranty

Expedited Lead Time

Video Call Training Session

Extra Locker Keys

• The Blocker Locker system was created to solve the ever-present device storage issues that many departments face. The system enables proper processing during each stage in custody, from device intake to interrogation.
• The pairing of the Charge & Shield Faraday Bag plus Blocker Locker allows for transporting, charging, data extraction, and keeping devices securely stored while shielded from RF signals.
• The locker has the capability to charge and fit two Charge & Shield Faraday Bags (up to tablet size), unlike mainstream locker compartments which are too small and only designed to hold a phone or tablet without the added mass of a faraday bag and cables.
• The included cables are shielded, high-quality, and specifically selected for use with the Charge & Shield Faraday Bag and locker. Two cable sets are included with each Charge & Shield Faraday Bag.
• We tailored the locker charging setup to fit the digital forensics process. We included a power indicator light, dual USB power receptacles in each compartment, visibale usage instructions, key dropbox, and all of the charging components needed to be compatible with a variety of devices.
• A power failure detector hidden underneath the locker sends a SMS and/or email if the main power in the unit is lost.
• An innovative cable lock on the external side of the Charge & Shield Faraday Bag's USB filter prevents the power cable for disconnecting unintentionally.
• Incoming officers or detectives that don't know how to handle the device can view the instructional sticker placed on front of the locker cabinet to follow the correct processing steps.

• Find an empty Blocker Locker compartment and insert the device into the Charge & Shield Faraday Bag (further connectivity instructions are listed above).

• Lock the compartment door using the matching numbered key. Two keys for each compartment plus four master keys are included.

• Place the compartment key in the secure dropbox attached to the Blocker Locker.

• Evidence manager accesses the dropbox as needed to retrieve locker compartment keys.