The Mission Darkness TitanRF™ Faraday Foam Gasket is a foam strip covered in a high-shielding conductive fabric with an adhesive backing on the bottom side. The flexible radio frequency (RF) shielding foam is primarily used as a barrier for gasketing, cushioning, and sealing applications such as faraday enclosures, forensic box lids, doorways, and joints. It is available in multiple sizes; select the preferred dimensions from the drop-down menu. The short length is better for small enclosures, such as box lids. It is the same material used along the lid seal of the Mission Darkness BlockBox Lab. The long length is better suited for doorway frames and large enclosures.

To use, simply remove the peelable backing and firmly adhere to a flat surface. You can trim the gasket with scissors to fit your specific need.

• Standard Size — 20"L x 0.4"W x 0.47"H (50.8cm x 10mm x 12mm)

The bottom side of the foam gasket has a peel-and-stick adhesive backing, making it simple to attach to any surface.

Image of the short foam gasket used inside the Mission Darkness Block Box Lab lid. Easily replace the seal if it gets too compressed over time.

• Long & Thin Size — 90"L x 0.75"W x 0.25"H (228.6cm x 19mm x 6.35mm)

• Long & Thick Size — 90"L x 0.75"W x 0.5"H (228.6cm x 19mm x 13mm)

You can use the foam gasket to maintain conductivity in faraday box lids, doorways, and joints. The foam compresses and creates a secure RF seal.

The long foam gasket is flexible and able to able to curve around corners. The length is ideal for lining doorways; choose between the thin and thick sizes depending on your gasketing need. *Two long gaskets are required to line a standard door frame.