Pack it. Sort it. Seal it.
A travel-ready Faraday duffel that shields and organizes multiple devices at once: one large shielded compartment plus four removable MD-Tach™ Faraday sleeves that each seal independently.
Organize and shield
multiple devices at once
The central duffel compartment is a full Faraday chamber, big enough for multiple laptops, tablets, radios, and bulky electronic gear. Two layers of high-shielding TitanRF™ Faraday Fabric line every interior side, joined with dual paired seam construction, so everything you pack goes quiet the moment it is sealed.

Everything built into the bag
MD-Tach™ modular system
Removable Faraday sleeves attach and detach from the duffel with a built-in zipper connection. Open one, keep the rest sealed.
Two-layer TitanRF™
The central chamber and every sleeve use two layers of high-shielding TitanRF Faraday Fabric with dual paired seam construction.
Full-spectrum shielding
Blocks cellular and 5G, Wi-Fi 2.4 and 5GHz, Bluetooth, GPS, RFID, NFC, and radio from low MHz to 40GHz. EMI, EMR, and EMF protection.
Uniquely serialized
Every bag carries a unique serial number to support asset tracking and evidence chain of custody.
Certified fabric
TitanRF Faraday Fabric is lab tested and certified to shielding effectiveness standards MIL-STD 188-125 and IEEE 299-2006. Full reports on request.
Wear-resistant build
Durable ballistic nylon exterior with heavy-duty reinforced handles and load-bearing strapping, engineered for years of field carry.
Durable outside,
silent inside
A wear-resistant ballistic nylon shell protects both the bag and the electronics inside it. Reinforced nylon side and top handles, load-bearing strapping, and a modern low-profile silhouette let it move through airports, checkpoints, and field sites without drawing attention.
The central compartment opens and closes on a magnetic closure, fast to load and secure once sealed, while an assortment of unshielded zippered accessory pockets keeps cables, credentials, and everyday items organized alongside your shielded gear.

Covert protection, wherever the mission goes
Built for plain-clothes operator travel, executive data protection, and state, local, federal, and military forensics. Collect multiple devices for evidence, cross borders with sensitive data, and keep everything hacking-, tracking-, and spying-proof in transit or storage.
Five shielded bags in one
The Disconnect ships with a large Faraday duffel compartment plus four removable handheld sleeves: one keyfob, two phone, and one tablet size. Each sleeve detaches from the MD-Tach™ zipper seam and reattaches in seconds, so you can access the contents of one compartment while the others stay fully RF-sealed.
Pull a sleeve out and carry it independently through the day. Swap a sleeve in or out as evidence needs change, or replace one entirely. The seized device stays shielded the whole time.
Sleeves close with a double-roll Velcro seal and a full-width rubber grip pull tab. Additional and replacement sleeves are sold separately as the Disconnect Faraday Bag (keyfob, phone, and tablet sizes) and are currently compatible with the Disconnect Duffel only.
Duffel or backpack
A removable padded shoulder strap and removable padded backpack straps both connect with metal clasps and D-rings, so the Disconnect carries the way each leg of the trip demands.
Grab-and-go carry
Two top side padded handles and two side grip handles for quick lifts, plus the removable padded shoulder strap for longer hauls.

Hands-free transport
Clip on the removable padded backpack straps to shoulder the full load through terminals, stairwells, and field sites.
Specifications
- Bag exterior
- 26 × 13 × 11"66 × 33 × 27.9 cm
- Central compartment interior
- 18 × 11 × 9.5"45.7 × 27.9 × 24.1 cm
- Keyfob sleeve interior
- 6 × 4"15.2 × 10.2 cm
- Phone sleeve interior
- 8 × 4.5"20.3 × 11.4 cm
- Tablet sleeve interior
- 12.5 × 9"31.8 × 22.9 cm
- Weight
- ~7 lb~3.2 kg
- SKU
- MDFB-DD
Blocks the full spectrum
Central compartment and all MD-Tach™ sleeves are built with two layers of high-shielding TitanRF™ Faraday Fabric on all interior sides with dual paired seam construction. Lab tested and certified to MIL-STD 188-125 and IEEE 299-2006. A shielded USB filter can be installed for powered charging or data extraction while a device stays in the main compartment (optional add-on, contact for a custom quote).
Demo videos
Two ways to pack the mission
Both seal your gear behind two layers of TitanRF™ Faraday Fabric. The difference is how you organize and carry it: the Disconnect adds removable MD-Tach™ sleeves and duffel-or-backpack straps, while the X2 runs a rugged MOLLE system for grab-and-go operators.


Need more compartments? Additional and replacement Disconnect Faraday Bag sleeves are available in keyfob, phone, and tablet sizes (Disconnect Duffel only).
Pack it. Sort it. Seal it.
Shield and organize every device in one bag, then carry it however the mission demands.