Pack it all.
Everything goes dark.
A mid-size shielded duffel with room for multiple laptops, tablets, and bulky electronics, plus a detachable MOLLE faraday pouch that runs on its own. Load it up, roll it shut, and every signal inside stops at the seam.
Everything inside, dark.
The main duffel cavity is the whole point: a large, fully shielded compartment sized for the gear you actually carry into the field.
Every layer engineered to block signal
Military-grade shielding, a rugged exterior, and closure hardware designed to seal fast and stay sealed.
Military-Grade Shielding
Faraday fabric lab-tested and certified to shielding-effectiveness standards MIL-STD 188-125 and IEEE 299-2006.
Rugged Water-Resistant Shell
Water-resistant ballistic nylon outer materials built for field handling, transport, and long-term storage.
Two-Layer TitanRF Liner
Two layers of high-shielding TitanRF Faraday Fabric on all interior sides with dual paired seam construction.
Complete Signal Blocking
Blocks 5G and cellular, WiFi 2.4 and 5GHz, Bluetooth, GPS, RFID, NFC, and radio from low MHz to 40GHz.
Dual-Compartment Independence
Open the main duffel without compromising the shielding of devices in the pouch — or the other way around.
EMF & EMP Protection
EMI, EMR, and EMF shielding that also guards stored electronics against EMP and solar events.
Serialized for Chain of Custody
Each bag carries a unique serial number to assist with asset tracking and evidence chain of custody.
NeoLok™ Roll-Top + Zipper
A NeoLok magnetic roll-top closure plus an outer zipper seal for fast access and added security.
A field-ready shell in water-resistant ballistic nylon
The X2 is built for the back of a truck, the floor of an evidence room, and the trail in between. Water-resistant ballistic nylon on the outside protects both the bag and everything sealed inside it.
This is a rugged, water-resistant build, not a submergible dry bag. When you need waterproof, submergible protection, reach for the Mission Darkness Dry Shield line.
- Outer material
- Ballistic nylon
- Water resistance
- Water-resistant
- Interior liner
- 2-layer TitanRF
- Front panel
- MOLLE webbing
Grab it and go dark
Whether it is a plain-clothes travel day, a grab-and-go mission, an executive trip, or a shelf of prepped electronics waiting out the next event — the X2 keeps devices safe and silent during transport and storage.
A detachable MOLLE faraday pouch
The X2 is the only faraday bag on the market that comes equipped with a detachable MOLLE-based faraday pouch. Two quick-snap straps and MOLLE webbing let it lift off the duffel and run on any pack, vest, panel, or gear belt, a feature built with military operators in mind. It also attaches to the Dry Shield Faraday Backpack 40L.
The pouch shields the smaller, higher-turnover devices you reach for most: cell phones, GPS units, transponders, two-way radios, and keyfobs.
Need more shielded compartments? Add extra Mission Darkness MOLLE Faraday Pouches and swap them in and out as the mission changes, including the waterproof, submergible Dry Shield MOLLE Faraday Pouch. The front webbing takes any MOLLE-compatible gear you already carry, too.
Independent shielding. Open the main duffel without breaking the pouch's seal, and open the pouch without breaking the duffel's. Separate high-priority devices from low, or send the pouch to a different facility and reattach it later.
Built to be worn, gripped, and geared up
The front panel is a MOLLE platform; the carry system is built for heavy loads two ways.

A modular attachment platform
MOLLE webbing across the front side holds the included faraday pouch plus any MOLLE-compatible gear you run: electronics pouches, cable kits, and field accessories. It is the most widely used modular system in the world, which is exactly why it is here.

Two ways to shoulder a heavy load
Two heavy-duty reinforced padded handles are built into the bag to support carrying heavy objects. Prefer hands-free? A detachable shoulder strap with metal hardware carries the full load and comes off when you do not need it.
X2 Faraday Duffel
A 2nd-generation build with upgraded materials. Faraday fabric lab-tested and certified to shielding-effectiveness standards; full test reports available on request. The Gen 2 bag is identified by its red stitching.
- Duffel interior
- 23" x 10" x 10"58.4 x 25.4 x 25.4 cm · devices must fit inside
- Duffel exterior
- 26" x 13" x 13"66 x 33 x 33 cm
- MOLLE pouch
- 6" x 8" x 2"15.2 x 20.3 x 5.1 cm · SKU MDFB-A-DFP
- Outer material
- Water-resistant ballistic nylon
- Interior liner
- Two layers TitanRF Faraday FabricAll interior sides · dual paired seam construction
- Closure
- NeoLok magnetic roll-top + outer zipper seal
- Carry
- Two padded load-bearing handles + detachable metal-hardware shoulder strap
- Extras
- Front MOLLE webbing · unshielded zipper accessory compartment · transparent branding pocket
- Serialization
- Unique serial number for asset tracking & chain of custody
- Duffel SKU
- MDFB-D-A
Demo videos
Two ways to pack the mission
Both seal your gear behind two layers of TitanRF Faraday Fabric. The difference is how you carry and organize it: the X2 runs a rugged MOLLE system, while the Disconnect adds removable faraday sleeves and backpack straps.


Load it up. Seal it shut.
Outfitting a team or agency? Talk to us about bulk orders and custom branding, from woven labels during production to agency info in the transparent back pocket.