Mission Darkness™ CYPHERCYLENT Faraday Car Cover - Triple Chamber
Built to order. Lead times are typically weeks rather than months, though larger and customized builds can take longer. Contact us for the current lead time. Designed and assembled in the USA.
Designed and assembled in the United StatesBuilt to order in weeks, not months
Why build a permanent room when you can deploy CYPHERCYLENT?
Both reach the same 80+ dB isolation. One is a construction project bonded to the building. The other is equipment you configure, deploy, and relocate as the mission moves.
Field Guide · 7 min read
Shielded room vs. Faraday tent
Cost, leak points, structural risk, relocation, and operator comfort, compared in full.
Read the comparison →
From a tabletop box to a vehicle bay.
Six stock form factors on one construction method. Same fabric, same door system, same filter plate architecture, scaled from a 30 inch tabletop enclosure to a cover that swallows a full size truck. Drawn here to true relative scale. Click any one to switch the page to it.
Enter and exit without breaking isolation.
Three chambers in one shielded shell. The vehicle bay holds the subject vehicle. A double door vestibule beside the front entrance lets examiners move in and out while the bay stays sealed. A rear chamber holds anything still transmitting, out of reach of remote wipe. Dimensions below are a recommended build and adjust to the deployment.
The Subject Vehicle
Full size vehicle drives in through the front wall and the shell closes around it. Sized for trucks, SUVs, and tactical transport.
21 ft L x 9 ft W x 7.5 ft H internalEnter Without Leaking
A double door airlock beside the front entrance, for examiners only, not the vehicle. One door closes before the next opens, so the bay never sees outside signal. Carries an AC power filter for its interior light and includes a floor panel.
4 ft L x 4 ft W x 7.5 ft H internalIsolate What Is Live
A separate shielded compartment for devices still emitting. Anything placed here is out of reach of remote wipe, tracking, and inbound commands while work continues in the bay.
4 ft L x 9 ft W x 7.5 ft H internalAnatomy of a Faraday enclosure.
Six engineered systems combine into one deployable enclosure that reaches shielded-room performance without permanent construction. The same architecture runs through every size in the lineup.
Shielded Liner
The enclosure itself. A continuous TitanRF Faraday Fabric shell that hangs inside the frame on clamps and Velcro tension straps, forming the shielded room. Straps let you tighten and reposition it, and take up slack as the fabric settles over time.
Carbon Fiber Frame
Lightweight, non-corroding poles with patent pending modular aluminum connectors. Self standing, assembles without tools, and carries the liner without a permanent structure.
RFMagLink™ Door
Patent pending magnetic closure with three rows of magnets for redundancy. Carbon fiber stiffeners let it fold and latch open. Seals on contact, with no manual alignment.
Filtered Connections
CE certified shielded filter plates pass power, ethernet, and USB through the wall without leakage. Modular mounting means ports get reconfigured, not rebuilt.
Shielded Ventilation
Honeycomb air vents with blower fans move air through the shielding layer without opening a signal path. HVAC penetrations available for longer occupancy.
Field Repair
Conductive patches and tape ship in every kit and bond directly to the shielding layer. A puncture gets fixed in the room in minutes, with no RMA and no loss of performance.
TitanRF™ technology.
Every enclosure is built on our proprietary TitanRF Faraday Fabric, a non-stitched copper and nickel composite weave bonded with conductive tape at every joint. It is the reason the shell is continuous, field repairable, and certified to MIL-STD-188-125 and IEEE 299-2006.
Built around what actually fails.
Traditional shielded tents fail in predictable places. Stitched seams tear. Zippered doors leak. Filters cannot be changed once the enclosure is built. A puncture sends the whole thing back to the vendor. CYPHERCYLENT was engineered against every one of those failure modes.
No thread, no holes
Seals without aiming
Change them yourself
Built for vehicle forensics.
Modern vehicles are rolling evidence: infotainment history, paired phones, telematics, event data. Extracting any of it means cutting the vehicle off from the networks it is still talking to. See our vehicle forensics range.
Isolated Extraction
Pull infotainment, telematics, and event data with the vehicle cut off from cellular, WiFi, and GPS. No remote wipe, no over the air update, no location reporting mid extraction.
Seizure and Holding
A seized vehicle can be parked inside and left isolated for as long as the case requires, without tying up a hardened bay or leaving connected systems reachable.
Live Device Quarantine
Phones, keyfobs, and trackers recovered from the vehicle go straight into the rear chamber, isolated from the moment they are found while work continues in the bay.
Tracker Sweeps
Sweep a vehicle for covert trackers in a controlled RF environment, where ambient signal cannot mask a transmitter or trigger one to report.
Asset Protection
Shield vehicle electronics during storage, maintenance, and standby. Navigation, comms, and engine control emerge intact and mission ready.
Forward Deployment
Packs into transport cases and stands up on site. A shielded vehicle bay where no fixed facility exists, indoors or under its own protective cover.
Every enclosure is configurable.
The standard kit is a starting point, not a fixed spec. Dimensions, filter connections, flooring, fabrics, covers, and chamber layout can all be specified to the deployment. Use the configurator to price a build, or send us the requirement and we will scope it.
Custom Dimensions
Adjust length, width, and height to fit the room, the vehicle bay, or the shelter you are deploying into. Sizing is not limited to the standard models.
Shielded Filter Connections
Add filter types beyond the standard RJ45, USB, and AC power set. Additional ethernet, DC power, USB Type-C, fiber, and RF connections, in the quantity and placement you specify.
EMP Surge Arrester
A power filter with an integrated EMP surge arrester on the AC line, for deployments where inbound pulse protection matters as much as RF isolation.
Waterproof Cover
An exterior waterproof cover that shields the TitanRF fabric from rain, snow, wind, and UV. For field deployment and any scenario outside a controlled indoor space.
Fire-Retardant Fabric
TitanRF Flame Retardant Faraday Fabric in place of the standard shielding layer, specified where facility fire codes or the operating environment call for it.
Sound Dampening
Available as an exterior cover, an interior liner, or both. For briefings, interviews, and any workflow where conversation inside should not carry into the room around it.
ErgoLayer™ Flooring
An engineered upgrade from the standard floor mat. Adds comfort underfoot, abrasion resistance, and conductive ground continuity for extended operational use.
Shielded Windows
RF shielded viewing windows set into a door or wall, so supervisors can see into the enclosure without opening it.
Price your build in the tent configurator.
Start from a preset, set dimensions and chambers, add filters and options, and generate a configured quote you can send to your team. No account required.
Specifications
Installation and safety notes.
Installation
These are not designed for frequent teardown and reassembly. The expectation is a dry indoor space with the enclosure left standing. Repeated moves increase the chance of tarnishing or tearing the shielding layer.
Assembly
Multiple people may be needed to build the frame and install the fabric correctly. Wear protective gloves when handling the shielding material. The only hand tool required is a 3mm Allen wrench.
Door Seal
Test the seal several times after assembly, adjusting tension straps as needed for an even, rigid closure. Install the floor mat before use so furniture and foot traffic do not abrade the fabric.
Safety Warning
TitanRF Faraday Fabric and Tape contain copper and nickel. They are conductive and flammable. Keep them away from outlets, plugs, cables, and any source of electricity to reduce fire risk.
Mission Darkness™ and TitanRF™ are trademarks of Merakai, LLC dba MOS Equipment. Made to order. Shipping method and cost vary by model, configuration, and destination. Larger enclosures ship freight and do not qualify for free domestic shipping. Contact us for a shipping quote, domestic or international.