Start with a 10′8″ × 9′ panel covering 96 sq ft.
TitanRF™ Faraday Fabric
Faraday Fabric Panel
A preassembled 10.66 ft × 9 ft (96 sq ft) conductive fabric panel for wall coverings and RF-shielding enclosures. Blocks Wi-Fi (2.4 and 5 GHz), Bluetooth, cellular signals including 5G, GPS, RFID, NFC, and radio signals from low MHz through 40 GHz.
96 sq ft Coverage
40 GHz Shielding range
3 sheets Panel build
Updated image placeholder · main product photograph
Folded panel
Dimensions
Seam detail
In use
Mission Darkness™
TitanRFFaraday Fabric
Panel
One prejoined, single-layer conductive panel for large surfaces, equipment, and custom RF-shielding builds.
10′8″ × 9′ 96 sq ft Three prejoined sheets
01 / Panel construction
Three sheets. One ready-made panel.
The panel arrives joined and ready to adapt to your project. Two overlaps are taped on both faces for a connected panel surface.
01 Two slight fabric overlaps 02 2.5″ TitanRF tape at each seam 03 Tape applied on front and back faces
Skip the assembly work.
Joining large sheets typically takes two people, a clean flat workspace, careful alignment, and even tape application. Your panel arrives with three sheets already joined and both seams taped on the front and back.
DIY materials $287*
Preassembled panel $350 $63 more
*DIY materials estimate excludes assembly time.
02 — Product information
Panel details
Built for large shielding surfaces
A prejoined starting point for custom RF projects.
Use the 96 sq ft panel for wall coverings, large electronics, device isolation, or adapt it for tents, cages, and other enclosures. TitanRF fabric is designed to block signals from low MHz through 40 GHz, with >65 dB single-layer attenuation. A single covered wall does not create a fully isolated room; results depend on the complete enclosure.
Built for Your Next Shielding Project
Three sheets arrive overlapped and taped on both faces.
Cut, sew, glue, or tape it for equipment, frames, or custom layouts.
Applications at a glance
Explore the Possibilities
Technical specification
Fabric & finished panel
| SKU | MDFF-PANEL |
|---|---|
| Fabric type | Woven, stretchable nickel-copper conductive fabric |
| Composition | 74% polyester, 22% nickel, 4% copper |
| Resistance | ≤10 MΩ |
| Thickness | 180±20 μm |
| Individual sheet width | 1,115±10 mm |
| Weight | 78±5 g/m² |
| TD tensile resistance | 50±5 kgf per 5 cm |
| MD tensile resistance | 85±5 kgf per 5 cm |
| TD tensile strength | 28 ±5 MPa |
| MD tensile strength | 45 ±5 MPa |
| TD / MD elongation | 45±5% / 30±5% |
| Attenuation | >65 dB single layer |
| Finished panel | 10′8″ × 9′ · 96 sq ft |
| Approximate panel dimensions | 3.25 × 2.75 m · 8.92 m² |
Independent fabric testing
Tested by Keystone Compliance.
Keystone Compliance, an accredited regulatory compliance laboratory, tested the fabric material. These test results do not guarantee the performance of a completed enclosure.
MIL-STD-188-125
Tested March 27, 2019
View report →IEEE 299-2006
Tested October 7, 2020
View report →
01 / Fasten
Fasten sparingly
Screws may suit some projects; use them sparingly.
02 / Join
Join and seal
Overlap adjoining fabric and apply conductive tape along the seam.
03 / Apply
Use a thin adhesive layer
General contact adhesive may be used; avoid heavy application.
TitanRF how-to
See fabric and tape in use.
Watch a DIY Faraday enclosure demonstration. Project results depend on the complete design, including seams, closures, and openings.
See the TitanRF Faraday Fabric FAQ for additional guidance.
Safety: The fabric and tape contain conductive metals and are flammable. Keep them away from outlets, plugs, cables, and other sources of electricity. Wear gloves if sensitive to nickel, copper, or polyester. California Proposition 65: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Build the complete system
TitanRF supplies for your project
04 — Project support
Frequently asked questions.
Does covering one wall create a fully shielded room?
No. A fully shielded enclosure needs a continuous conductive barrier. Gaps, seams, closures, and penetrations affect its performance.
Can the fabric be cut, sewn, or glued?
Yes. The fabric can be cut, sewn, taped, or glued for installation and custom builds.
Are usage instructions included?
Yes. A booklet with construction tips and usage instructions is included.
Final sale: The panel is nonrefundable unless the return is due to a manufacturing defect or the product has not been touched and remains in unopened packaging.